SH-R311
HOME > SH-R311
HOME > SH-R311
-
Edge banding machine SH-R311
- The machine automatically applies and finishes edges to the workpieces.
- It is designed to perform edge banding work for 0.45 to 2 mm edges.
- The process specifications can be changed according to customer requirements.
-
Process/Unit/Features
-
Joint trimming
Evenly trimming the banding surface of the workpiece to ensure even adhesion.
Clean cutting is possible by using two saw blades Provide a clean working environment by connecting an extraction hood
-
Gluing
Gluing the edge and pressing it using rollers.
Since the drive motor of the glue container and the gluing roller are integrated, it is possible to apply uniform glue with minimum pressure.
-
First End Cutting
Cut the front side of the hanging edge to match the length of the workpiece.
Blade cutting minimizes edge damage by supporting the edge while it is cut.
-
Trimming
The top and bottom of the edge hangings are cut using a blade.
The top and bottom excess edges are trimmed in the first process to improve the scraping finish. Edge remnant can be blown away using air.
-
Scraping
After trimming, smooth the rough R value on the top and bottom of the edge using a blade.
Easily adjust radius value using an indicator Edge remnant can be blown away using air.
-
Second end cutting
Cut the end side of hanging edge to match the length of the workpiece.
Blade cutting minimizes edge damage by supporting the edge while it is cut.
-
Grooving
Make a groove on the bottom of the workpiece.
Provide a clean working environment by connecting an extraction hood.
-
Buffing
Wipe off the glue residue on the top and bottom of the workpiece.
A rotating buffing cloth wipes away bond residue from the product surface.
-
-
Machine operation clip
※ Instead of motor trimming, blade trimming is applied, and corner trimming process is not included. -
Basic model specification
Model SH-R311 Size(L*W*H) 5350 * 1000 * 1400 Feeding speed 16m/min(Option 20m/min) Electric 220/380V 14KW Air pressure Above 6kgf/cm Supportable Edge 0.45~2mm Soft Workpiece Thickness 9~50mm(Option 80mm) Feeding Interval 100mm Min. workpiece width 50mm Control Method Limit Sensor ※ Custom manufacturing (changes to the process specifications) is possible for each model according to customer requirements